Product inspection is one of the most effective ways to reduce risk when sourcing from China. But knowing that inspection is important is only half the equation.
The other question is:
When should the inspection actually take place?
Inspect too early, and many products may not yet be finished. Inspect too late, and the goods may already be packed, shipped or fully paid for, leaving you with far less leverage if something is wrong.
The right timing depends on the product, the order value, the complexity of production and the risks involved.
For most importers, there are four key moments when an inspection can take place.
1. Before Production: Verify Materials and Requirements
Quality control should begin before mass production starts.
This is particularly important for customized products or orders involving specific materials, dimensions, colours, components, branding or technical requirements.
At this stage, the objective is not necessarily to inspect finished products. Instead, you want to confirm that the supplier clearly understands what must be produced.
Before production, buyers should make sure that important requirements have been documented, including:
- product specifications;
- dimensions and tolerances;
- materials;
- colours;
- electrical specifications where applicable;
- branding and logos;
- packaging requirements;
- labels and barcodes;
- approved samples;
- required quantities.
Why does this matter?
Because an inspector cannot effectively determine whether a product is compliant if the buyer has never clearly defined what “compliant” means.
Inspection starts with clear specifications.

2. During Production: When Problems Need to Be Caught Early
A During Production Inspection, often called a DUPRO, takes place while manufacturing is still underway.
This can be particularly valuable when the order is large, technically complex or highly customized.
Instead of waiting until thousands of units have been completed, selected products from the production line can be checked while the factory is still manufacturing the order.
Imagine ordering 10,000 customized products.
If a critical defect is discovered after the first 1,500 units have been produced, correcting the problem may still be manageable.
Discovering exactly the same defect after all 10,000 units have been completed creates a much more serious situation.
During-production inspections can therefore help identify issues involving:
Materials — Is the factory using the agreed material?
Dimensions — Are products being manufactured within the required measurements?
Workmanship — Are recurring defects appearing on the production line?
Components — Are the correct parts being installed?
Specifications — Does production correspond to the approved sample and purchase requirements?
This type of inspection is especially useful when correcting a mistake later would be expensive or difficult.
3. Before Shipment: The Critical Inspection for Most Importers
For many international buyers, the Pre-Shipment Inspection (PSI) is the most important inspection.
It normally takes place when production is substantially or fully completed and enough goods are packed to allow the inspector to evaluate the actual shipment.
The objective is straightforward:
Determine whether the finished order conforms to the buyer’s requirements before it leaves the supplier.
A pre-shipment inspection may verify:
- quantities;
- product appearance;
- workmanship;
- dimensions;
- colours;
- functionality;
- technical specifications;
- accessories;
- labels;
- packaging;
- cartons;
- shipping marks.
Depending on the inspection plan, products can be randomly selected from the completed batch and checked against predefined criteria.
The timing is crucial.
Ideally, the inspection should happen before the buyer releases the final payment and before the supplier ships the goods.
That gives the buyer substantially more leverage if serious problems are discovered.
If the inspection fails, the supplier may need to rework defective products, replace units, correct packaging or address other non-conformities before shipment is authorized.
Once the goods are already on a vessel heading to another continent, correcting those problems becomes considerably more difficult.
4. During Container Loading: When Shipment Integrity Matters
There is another stage that importers sometimes overlook: container loading.
A successful pre-shipment inspection confirms that acceptable products existed at the factory when they were inspected.
But another question remains:
Are those actually the products being loaded into your container?
A Container Loading Check can provide additional verification during the loading process.
Depending on the assignment, this may include checking:
- product and carton quantities;
- carton condition;
- shipping marks;
- container condition;
- loading process;
- whether the correct goods are being loaded;
- container seal information.
This can be particularly useful for high-value shipments, full-container loads or situations where the buyer wants greater visibility over the final stage before departure.
So, Which Inspection Do You Actually Need?
Not every order requires inspections at every stage.
Quality control should be proportional to risk.
For a relatively simple, low-value order from a supplier with whom you have successfully worked several times, a pre-shipment inspection may be sufficient.
For a new supplier manufacturing a customized product worth tens of thousands of dollars, relying on only one final inspection may be unnecessarily risky.
A more comprehensive process could look like:
Supplier Verification → Sample Approval → Production Requirements → During-Production Inspection → Pre-Shipment Inspection → Container Loading Check
But adding inspections mechanically does not automatically make procurement safer.
The objective is to identify where the major risks exist and place quality-control checkpoints accordingly.
New Supplier? Increase Your Level of Control
Your relationship with the supplier should also influence inspection strategy.
A factory you have never worked with represents greater uncertainty than a supplier that has successfully completed ten orders for you.
For a first commercial order, additional verification is often justified.
You are still learning how the supplier manages:
- production consistency;
- quality control;
- packaging;
- deadlines;
- communication;
- corrective actions.
A good sample alone is not sufficient evidence that mass production will achieve the same standard.
As the supplier develops a proven performance record, your inspection strategy can be adjusted based on actual experience.
Trust should be built from performance data, not assumptions.
The Larger the Financial Exposure, the Stronger the Control
Inspection costs should also be evaluated relative to the total value at risk.
Suppose you are importing a commercial shipment worth $40,000.
Add international freight, customs costs, local transportation and the commercial consequences of receiving unusable products.
Your real exposure may be substantially higher than the factory invoice.
In that situation, attempting to save a relatively small amount by eliminating an important inspection checkpoint can be poor risk management.
The relevant question is not simply:
“How much will this inspection cost?”
It is:
“What would happen financially if this shipment were wrong?”
Do Not Wait Until the Goods Are Already Shipped
One of the worst times to begin thinking about quality control is when the container has already left China.
At that stage, inspection becomes diagnosis rather than prevention.
You may discover what went wrong, but your ability to correct it economically has already deteriorated.
The strongest quality-control strategy therefore works backward from shipment.
Before the goods leave the supplier, you should know:
What needs to be checked?
When should it be checked?
What constitutes an acceptable result?
What happens if the inspection fails?
Those decisions should ideally be made before production is completed—not after a problem occurs.
Inspection Is About Timing as Much as Quality
There is no universal inspection schedule suitable for every purchase.
A $2,000 standard product order and a $100,000 customized manufacturing project should not necessarily have the same quality-control process.
The right inspection strategy depends on:
Order value + product complexity + customization + supplier history + consequences of failure.
For many importers, a pre-shipment inspection should be a fundamental checkpoint.
For higher-risk orders, quality control may need to begin much earlier and continue through production and container loading.
The principle is simple:
Inspect when problems are still inexpensive enough to correct.
At Herogroupe, we help international buyers coordinate supplier verification, factory visits, product inspections, procurement and logistics in China.
Before your next shipment leaves China, we can help you determine the appropriate quality-control checkpoints based on your product, supplier and level of risk.
Planning an order from China? Contact Herogroupe before production or shipment to discuss the appropriate inspection strategy for your purchase.